Time Study with Alphacam

Q.  Is there a way to create an estimate of machine time for a part created in Alphacam?

A.  Yes, it is called Time Study.  This is a free option with Alphacam.  Go to the Utils drop down menu, and click on Add-Ins.  Under the Free Options area, select Alphastudy (A.P.P).



Once Alphastudy has been turned on, there will be a new menu item under the File drop down menu called Time Study.



Create a part including all machining operations in Alphacam.  Select File and Time Study. 



Units -Inches or Metric, Select the unit of measure used in Alphacam.
Machine Tool Rapid Rate – Speed the CNC machine travels at Safe Rapid Level.
                            IPM = Inches per Minute
                            mmPM = Millimeters per Minute
Tool Change Time – Average time the CNC machine takes to change tools.
Part Load/Unload Time – Average time for the machine operator to load and unload material.
Efficiency Rate – The speed the machine operator has set the CNC machine to run.

After the parameters have been established, select OK and the part will be analyzed.



This window provides a quick visual view of the operations and their processing time.

Selecting the View Report option, will provide a more precise break down of the part.  This will also allow printing of this report.

<< Back with Tips & Tricks